A Novel Filter Tundish towards Improving Quality and Yield of Steel for Single Strand Slab Casting
Published: 2023-09-12
Page: 687-697
Issue: 2023 - Volume 6 [Issue 4]
Debasish Chatterjee *
Department of Materials and Metallurgy Engineering, NIAMT Ranchi, Jharkhand, India.
*Author to whom correspondence should be addressed.
Abstract
Inclusion and grade intermixing create huge metal loss during single Strand slab casting. In the present investigation a multi reactor tundish with argon purging and a Novel Filter tundish has been proposed to remove high level inclusions and reduce grade intermixing during slab casting.
Keywords: Novel filter tundish, muti reactor tundish with argon purging
How to Cite
Downloads
References
Mazumdar D, Tundish Metallurgy. Towards Increased Productivity and Clean Steel, Trans Indian Inst Met. October–December 2013;66(5–6):597–610.
Yogeshwar Saha. Tundish Technology for Casting Clean Steel: A Review, Metallurgical and Materials Transactions B. August 2016;47B:2095-2106.
Huiqing Sarah Chen, Robert D Pehlke. Mathematical Modeling of Tundish Operation and Flow Control to Reduce Transition Slabs, Metallurgical and Materials Transactions B. 1996;27B:745-756.
Mehdi Alizadeh, Hossein Edris, Ahmad Reza Pishevar. Behavior of Mixed Grade during the Grade Transitionfor Different Conditions in the Slab Continuous Casting, ISIJ International. 2008;48(1):28–37.
Marcela B Goldschmit, Sergio P Ferro, Guillermo F Walter, Virginia G Aranda, Jorge A Tena Morelos. Numerical Model for the Minimization of Intermixed Round Bars in a Four Line Continuous Caster, Metallurgical and Materials Transactions B. 2001;32B:537- 546.
Myung Jong Cho andIn CheolKim. Simple Tundish Mixing Model of Continuous Casting during a Grade Transition, ISIJ International. 2006;46(10):1416–1420.
Myung Jong Cho, Sang Joon Kim. A Practical Model for Predicting Intermixed Zone During Grade Transition, ISIJ International. 2010;50(8):1175–1179.
Alexander Braun, Marek Warzecha, Herbert Pfeifer. Numerical and Physical Modeling of Steel Flow in a Two-Strand Tundish for Different Casting Conditions, Metallurgical and Materials Transactions B. 2010;41B:549-559.
Chao Chen, Lage Tord Ingemar Jonsson, Anders Tilliander, Guoguang Cheng, Par Goran Jonsson. A Mathematical Modeling Study of Tracer Mixing in a Continuous Casting Tundish, Metallurgical and Materials Transactions B. 2015;46B:169-190.
Tomasz Merder, Marek Warzecha. Optimization of a six-strand continuous casting Tundish: Industrial Measurements and Numerical Investigation of the Tundish Modifications, Metallurgical and Materials Transactions B. 2012;43B:856-868.
Robert D Pehlke. Computer Simulation of Solidification Processes—The Evolution of a Technology, Metallurgical and Materials Transactions B. August 2002;33B:519-541.
Roderick IL Guthrie. Fluid Flows in Metallurgy—Friend or Foe?, Metallurgical and Materials Transactions B. June 2004; 35B:417-437.
Debasish Chatterjee. A Novel Tundish for Single Strand Slab Casting, J. Inst. Eng. India Ser. D. July–December 2016;97(2): 105–112.
Somnath Basu, Shiv Kumar Choudhary, Narendra U Girase. Nozzle Clogging behaviour of Ti-bearing Al-killed Ultra Low Carbon Steel, ISIJ International. 2004; 44(10):1653–1660.
Lifeng Zhang, Brian G Thomas. State of the Art in the Control of Inclusions during Steel Ingot Casting, Metallurgical and Materials Transactions B. October 2006; 37B:733- 761.
Lifeng Zhang, Brian G Thomas. Inclusions in Continuous Casting of Steel, XXIV National Steelmaking Symposium, Morelia, Mich, Mexico. 26-28, Nov.2003;138-183.
S. Joo, JW Han, Guthrie RIL. Inclusion Behavior and Heat-Transfer Phenomena in Steelmaking Tundish Operations Part II. Mathematical Model for Liquid Steel in Tundishes, Metallurgical Transactions B. October 1993;24B:767-777.
Chao Chen, Peiyuan Ni, Lage Tord Ingemar Jonsson, Anders Tilliander, Guoguang Cheng, Pargoran Jonsson. A model study of inclusions deposition, macroscopic transport, and dynamic removal at steel–slag interface for different Tundish Designs, Metallurgical and Materials Transactions B. June 2016;47B: 1916-1932.
Haitao Ling, Lifeng Zhang, Hong Li. Mathematical modeling on the growth and removal of non-metallic inclusions in the molten steel in a two-strand continuous casting Tundish, Metallurgical and Materials Transactions B. October 2016; 47B:2991-3012.
Yun Wang, Yunbo Zhong, Baojun Wang, Zuosheng Lei, Weili Ren, Zhongming Ren. Numerical and Experimental Analysis of Flow Phenomenon in Centrifugal Flow Tundish, ISIJ International. 2009;49(10): 1542–1550.
Qinfu Hou, Qiang Yue, Huanyang Wang, Zongshu Zou, Aibing Yu. Modelling of inclusion motion and flow patterns in swirling flow Tundishes with Symmetrical and Asymmetrical Structures, ISIJ International. 2008;48(6):787–792.
Miki Y, S Ogura, T Fujii. Separations of inclusions from molten steel in a tundish by use of a rotating electromagnetic field, Kawasaki Steel Technical Report no. 35. 1996;67-73.
Yuji Miki, Hidenari Kitaoka, Toshikazu Sakuraya, Tetsuya Fujii. Mechanism with a for Rotating Separating Inclusions from Electro-magnetic Field, ISIJ International. 1992;32(1):142- 49.
Henrik Solhed, Lage Jonsson, Par Jonsson. A theoretical and experimental study of continuous-casting Tundishes focusing on slag-steel interaction, Metallurgical and Materials Transactions B. April 2002;33B:173-185.
Joo S, Han JW, Guthrie RIL. Inclusion behavior and heat-transfer phenomena in steelmaking Tundish Operations Part II1. Applications--Computational Approach to Tundish Design, Metallurgical Transactions B. October 1993;24B:779-788.
Satish Kumar D, Rajendra T, Reddi Prasad, Sarkar A, Madhu Ranjan. Forced flotation of inclusions in tundish, Ironmaking and Steelmaking. 2009;36(6): 470-475.
Book Y Sahai, T Emi. Tundish technology for clean steel production, World Scientific Publisher. 2008;1-313.
Emi T. Steelmaking technology for the last 100 Years: Toward Highly Efficient Mass Production Systems for High Quality Steels, ISIJ International. 2015;55(1):36–66.